Explosion Proof Gas Station Underground Tank Alarm Diesel Fuel Leakage Sensor
Product Introduction
Guihe leak detector instrument designed for detecting water and oil between the two layers of double-deck tank. When there are lakegae between the two layer of tank, the SYW-E Sensor will detetect it and give singal to GH-SLI Console, the console will giving an audible and visual alarm through software calculation.
Users can take measures to deal with the leakage according the alarm, to avoid the safety hidden trouble andenvironmental pollution.
1. Leak detector Features
Safety: Explosion-proof gradeis ExiaIIBT4 issued by PCEC. The sensor structure is 304 stainless.
Sensitive: the instrutment detect accuracy <3mm, response time <2s
Stability: frequency variation of piezoelectric transducer belong to physical attribute, without structure, light and other factors interference. It can adapt to the complex environment, and with great anti - interference performance.
Intelligent trouble diagnosis: alarm lamp will flash when anything goes wrong with sensor. Users can inform factory alarm lamp status so that technicians judge the faults and repair it.
Intelligent oil/water diagnosis: detecting water and oil between the two layers of double-deck tank,when there are lakegae between the two layer of tank, the SYW-E Sensor will detetect it.
Simple Installation:485 protocol bus standard, easy for installation. Can share the same wirewith level meter.
Reserve switch output port, can realize interlocking control after connect with other equipments.
2. Technical Parameters
| Power Supply | 220VAC |
| Explosion-proof grade | ExiaIIBT4 |
| Alarm method | audible and visual alarm |
| Sensor size | according to the length of the tank |
| Temperature | .-40℃~+70℃ |
| Environment humidity | <85% |
| Accuracy | Accuracy |
| Response time | <2s |
| Pressure range | 80Kpa~110Kpa |
| Output mode | switch output |
| Blind size | DN50/80/100 |
| GH-SLI Console size | 300*180*113mm |
3. Inspection Standards:
GB50156-2012 (Design and construction of automobile fuel gas), GB3836.1-2010(Part 1 explosive environment:General requirements for equipment) Design requirements.
4. Other main products as :
gas station ATG/ automatic tank gauge,hose type tanker truck ATG ,Magnetostrictive probe , touch contorl sonsole , management system .double wall pipe leakage detector ,double wall tank leakage detector ,
Tank Calibration system/machine, high level alarm , gas alarm ,and others .
Using picture
